C64 Joystick with 4 buttons and variable rapid fire V1
You can download all these files from my Git repository: https://github.com/Technische-Dienstleistungen-Niggemann/osa-stick
3D printed parts
Compatible with Open Source Arcade Stick V0.9
Other parts
| Image | Description | Amount |
|---|---|---|
 | Buttons 30mm diameter 5V LED | 4 |
 | Potentiometer Kit 5k Ohm | 1 |
 | 555 IC NE555P | 1 |
 | Resistor 1k Ohm 0,125w | 1 |
| Resistor 1,8k Ohm 0,125w | 1 |
 | Ceramic Capacitor 10nF 50V | 1 |
 | Electrolytic Capacitor 47uF 16V | 1 |
 | Prototype DIY PCB Small | 1 |
 | 9 pin cable 9 pins 1m to 1,8m length | 1 |
 | Rubber foot 3mm hole 6mm height 11mm max outer diameter | 4 |
 | Countersunk head screw M3 x 12mm | 8 |
 | Knurled Nut M3 x 5mm 4,5mm outer diameter | 4 |
 | Hex nut M3 | 4 |
The circuit
On my GitHub repository you can also find Gerber files to produce a corresponding circuit board for this circuit.